Menu
Standards :ISO 179, ISO 180, ISO 8256, ASTM D 256, ASTM D 4812
The impact test determines the breaking energy of plastics under dynamic load. There are two different test methods. Isod and Charpy test methods. The isod test specimen is placed vertically while the Charpy test specimen is placed horizontally.
Pendulum Impact Test Machine Standards :ISO 179, ISO 180, ISO 8256, ASTM D 256, ASTM D 4812. The impact test determines the breaking energy of plastics under dynamic load. There are two different test methods. Isod and Charpy test methods. The isod test specimen is placed vertically while the Charpy test specimen is placed horizontally. Pendulum Impact Test Machine load hanging ease, fully automatic load lifting and calibration. Able to exceed the free 80 oscillation given in the standard, energy at standard angles, hammer tip design according to standards, selfcalibrating software.
| IZOD Tip | CHARPY Tip | |||
| Model No | ICJ-5,5 | ICJ-22 | ICJ-5 | ICJ-50 |
| Impact Type | 1J,5,5J | 15J, 22J | 1J,5J | 15J,20J,50J |
| Pendulum Speed | 3.5mv/s | 3.5mv/s | 2.9 m/s | 3.5 m/s |
| Starting Angle | 126° | 126° | 90° | 126° |
| Impact Edge Radius | R=2 mm | R=2 mm | R=2 mm | R=2 mm |
| Jaw Length | 40 mm | 40 mm | 40 mm | 40 mm |
| Impact Cutting Edge Radius | R=2 mm | R=2 mm | R=2mm | R=2mm |
| Arm Lenght | 400 mm | 400 mm | 400mm | 400mm |
| Impact Edge Radius | 16° | 16° | 16° | 16° |
| Pendulum Momentum | PL(1J) = 0.5155Nm PL(5,5J) = 2.8355N.m |
PL(15J) =7.733Nm PL(22J) = 11.3419N.m | PL(1J) = 0.5155Nm PL(5J) = 2.578 Nm |
PL(15J) =7.733Nm PL(25J) =12.889Nm PL(50J) =25.777Nm |
Your requests via the form have been canceled due to a technical error. Your requests are not reaching us. Please send your request to our e-mail address sales2@alarge.com.tr in our contact heading.
