Internal pressure/hydrostatic tests are performed in conditioned water environment. Compliance with the standards ISO 1167, ASTM D 1598, ASTM D 1599. The water distribution into the AL TANK let ± 0,5 – 1 °C, provided by the circulation of water in the tank. Locations of the heaters, the fluid taken and feeding for circulation in the tank are designed with computer simulation and the results have been proved by EU accreditation.

It is suitable for PPRC, PPH, PPB, PE, PVC PE-RT pipes and even composite pipes. Database management, system network.

• Zero steam leakage, energy saving with double layer insulation, minimum operating cost and water loss.
• Double safety control for instant temperature change.
• Automatic filling with water level control.
• Safety Discharge Duct for High level water
• Bottom discharge
• Folding lid with remote / direct control
• Safe operation
• High performance for water temperature disribution with ideal balancing circulation
• Usage with glycol water up to 105 °C
• Nearly up to ± 0,5 °C in-tank temperature distribution
• Applicable to any dimensions
• Positioning and traveling hanger system of test sample with End Caps inside the tank

Control System

• Fast data transfering 400 Hz
• 5.4 -10 ” PLC Touch Screen (4.2″, 7″, 10″) panel application.
• 17 – 62 ” Touch Screen PC Panel
• Real-time temperature measurement up to 4 points
• Successfull standard and accreditation requirements
• Connection to main pressure / hydrostatic test machine
• Frame around inner stainless cabinet (damage prevention)
• 1.2 mm outer coating
• Pneumatic cap drive system
• Wheel and fixing possibility
• Design without heat bridge
• Special cover gasket
• 1.5 mm up to 3 mm inside layer thickness.